Products · Red Head · Trubolt Wedge Anchor
Quote Button
 

Trubolt Wedge Anchor

Trubolt Wedge Anchor

Trubolt Wedge anchors feature a stainless steel expansion clip, threaded stud body, nut and washer. Anchor bodies are made of plated carbon steel, hot-dipped galvanized carbon steel, type 304 stainless steel or type 316 stainless steel as identified in the drawings or other notations.

Trubolt+ Wedge anchors consist of a high-strength threaded stud body, expansion clip, nut and washer. Anchor bodies are made of plated carbon steel. The expansion clip consists of a split cylindrical ring with undercutting grooves.

The exposed end of the anchor is stamped to identify anchor length. Stampings should be preserved during installation for any subsequent embedment verification.

Use carbide tipped hammer drill bits made in accordance with ANSI B212.15-1994 to install anchors.

Anchors are tested to ASTM E488 criteria and ICC-ES AC193. Anchors are listed by the following agencies as required by the local building code: ICC-ES, UL, FM, City of Los Angeles, California State Fire Marshal and Caltrans.


Trubolt Wedge Anchor Order Information

Carbon Steelwith Zinc Plating
Meets ASTM B633 SC1, Type III specifications for electroplating of > 5um = .002" thickness. This material is well suited for non-corrosion enviroments.
PART NUMBER THREAD LENGTH In. (mm) ANCHOR DIA. In. (mm) & DRILL BIT DIA. In. (mm) OVERALL LENGTH In. (mm) MAX. THICKNESS OF MATERIALS TO BE FASTENED In. (mm)
CWS-3830 CWS-3836 CWS-3850 1-5/8 (66.7)
2-3/8 (73.0)
3-5/8 (88.9)
3/8" - 16
3/8" - 16
3/8" - 16
3 (76.2)
3-3/4 (95.3)
5 (127.0)
5/8 (15.9)
1-3/8 (34.9)
2-5/8 (66.7)
CWS-1236 CWS-1242 CWS-1244 CWS-1254 CWS-1270 2-1/8 (54.0)
2-5/8 (66.7)
2-7/8 (73.0)
3-7/8 (98.4)
5-3/8 (136.5)
1/2" - 13
1/2" - 13
1/2" - 13
1/2" - 13
1/2" - 13
3-3/4 (95.3)
4-1/4 (108.0)
4-1/2 (114.3)
5-1/2 (139.7)
7 (177.8)
3/4 (19.1)
1-1/4 (31.8)
1-1/2 (38.1)
2-1/2 (63.5)
4 (101.6)
CWS-5850 CWS-5860 CWS-5870 CWS-5884 3-3/16 (81.0)
4-3/16 (106.4)
5-3/16 (131.8)
5-3/4 (146.0)
5/8" - 11
5/8" - 11
5/8" - 11
5/8" - 11
5 (127.0)
6 (152.4)
7 (177.8)
8-1/2 (215.9)
1-1/8 (28.6)
2-1/8 (54.0)
3-1/8 (79.4)
4-5/8 (117.5)

SELECTION CHART

Trubolt Carbon Steel with Zinc Plating
Meets ASTM B633 SC1, Type III specifications for electroplating of > 5um = .002" thickness. This material is well suited for non-corrosion enviroments.
PART NUMBER THREAD LENGTH In. (mm) ANCHOR DIA. In. (mm) & DRILL BIT DIA. In. (mm) OVERALL LENGTH In. (mm) MAX. THICKNESS OF MATERIALS TO BE FASTENED In. (mm)
WS-1416
WS-1422
WS-1432
3/4 (19.1)
1-1/4 (31.8)
2-1/4 (57.2)
1/4" - 20 1-3/4 (44.5)
2-1/4 (57.2)
3-1/4 (82.6)
3/8 (9.5)
7/8 (22.2)
1-7/8 (47.6)
WS-3822
WS-3826
WS-3830
WS-3836
WS-3850
WS-3870
1-1/8 (28.6)
1-5/8 (41.3)
1-3/4 (44.5)
2-1/2 (63.5)
3-3/4 (95.2)
3-7/8 (98.4)
3/8" - 16 2-1/4 (57.2)
2-3/4 (69.9)
3 (76.2)
3-3/4 (95.3)
5 (127.0)
7 (177.8)
3/8 (9.5)
7/8 (22.2)
1-1/8 (28.6)
1-7/8 (47.6)
3-1/8 (79.4)
5-1/8 (130.2)
WS-1226
WS-1236
WS-1242
WS-1244
WS-1254
WS-1270
1-1/4 (31.8)
2-1/4 (57.2)
2-3/4 (69.9)
3 (76.2)
4 (101.6)
5-1/2 (139.7)
1/2" - 13 2-3/4 (69.9)
3-3/4 (95.3)
4-1/4 (108.0)
4-1/2 (114.3)
5-1/2 (139.7)
7 (177.8)
1/8 (3.2)
1 (25.4)
1-1/2 (38.1)
1-3/4 (44.5)
2-3/4 (69.9)
4-1/4 (108.0)
WS-5834
WS-5842
WS-5850
WS-5860
WS-5870
WS-5884
WS-58100
1-3/4 (44.5)
2-1/2 (63.5)
3-1/4 (82.6)
4-1/4 (107.9)
5-1/4 (133.4)
5-3/4 (146.0)
5-3/4 (146.0)
5-8" - 11 3-1/2 (88.9)
4-1/4 (108.0)
5 (127.0)
6 (152.4)
7 (177.8)
8-1/2 (215.9)
10 (254.0)
1/8 (3.2 )
7/8 (22.2)
1-5/8 (41.3)
2-5/8 (66.7)
3-5/8 (92.1)
5-1/8 (130.2)
6-5/8 (168.3)
WS-3442
WS-3446
WS-3454
WS-3462
WS-3470
WS-3484
WS-34100
WS-34120
2-3/8 (60.3)
2-7/8 (73.0)
3-5/8 (92.1)
4-3/8 (111.1)
5-1/8 (130.2)
5-3/4 (146.0)
5-3/4 (146.0)
1-3/4 (44.5)
3/4" - 10 4-1/4 (108.0)
4-3/4 (120.7)
5-1/2 (139.7)
6-1/4 (158.8)
7 (177.8)
8-1/2 (215.9)
10 (254.0)
12 (304.8)
1/4 (31.8)
3/4 (19.1)
1-1/2 (38.1)
2-1/4 (57.2)
3 (76.2)
4-1/2 (114.3)
6 (152.4)
8 (203.2)
WS-7860
WS-7880
WS-78100
2-1/2 (63.5)
2-1/2 (63.5)
2-1/2 (63.5)
7/8" - 9 6 (152.4)
8 (203.2)
10 (254.0)
1-3/8 (34.9)
3-3/8 (85.7)
5-3/8 (136.5)
WS-10060
WS-10090
WS-100120
2-1/2 (63.5)
2-1/2 (63.5)
2-1/2 (63.5)
1" - 8 6 (152.4)
9 (228.6)
12 (304.8)
1/2 (12.7)
3-1/2 (88.9)
6-1/2 (165.1)
TIE WIRE
TW-1400 N/A 1/4" 2-1/8 (54.0) 9/32-hole (7.1)

SELECTION CHART

Trubolt Carbon Steel with Hot-Dipped Galvanizing
Meets ASTM A153 Class specifications for hot-dipped galvanizing > 45um = .002". It is highly recommended for damp, humid environments near coastal regions. Hot-dipped galvanized Trubolts have a coating thickness of zinc that is almost 10 times as thick as electroplaing. This creates greater corrosion resistance at a minimal cost.
PART NUMBER THREAD LENGTH In. (mm) ANCHOR DIA. In. (mm) & DRILL BIT DIA. In. (mm) OVERALL LENGTH In. (mm) MAX. THICKNESS OF MATERIALS TO BE FASTENED In. (mm)
WS-1226G
WS-1242G
WS-1254G
WS-1270G
1-1/4 (31.8)
2-3/4 (69.9)
4 (101.6)
5-1/2 (139.7)
1/2" - 13 2-3/4 (69.9)
4-1/4 (108.0)
5-1/2 (139.7)
7 (177.8)
1/8 (3.2)
1-1/2 (38.1)
2-3/4 (69.9)
4-1/4 (108.0)
WS-5834G
WS-5860G
1-3/4 (44.5)
4-1/4 (107.9)
5/8" - 11 3-1/2 (88.9)
6 (152.4)
1/8 (3.2)
2-5/8 (66.7)
WS-3446G
WS-3454G
WS-3484G
2-7/8 (73.0)
3-5/8 (92.1)
5-3/4 (146.0)
3/4" - 10 4-3/4 (120.7)
5-1/2 (139.7)
8-1/2 (215.9)
3/4 (19.1)
1-1/2 (38.1)
4-1/2 (114.3)

Selection Chart

Trubolt Type 304 Stainless Steel
Serves many applications well. It withstands rusting in architectural and food processing environments and resists organic chemicals, dye stuffs and many inorganic chemicals.
PART NUMBER THREAD LENGTH In. (mm) ANCHOR DIA. In. (mm) & DRILL BIT DIA. In. (mm) OVERALL LENGTH In. (mm) MAX. THICKNESS OF MATERIALS TO BE FASTENED In. (mm)
WW-1416
WW-1422
WW-1432
3/4 (19.1)
1-1/4 (31.8)
2-1/4 (57.2)
1/4" - 20 1-3/4 (44.5)
2-1/4 (57.2)
3-1/4 (82.6)
3/8 (9.5)
7/8 (22.2)
1-7/8 (47.6)
WW-3822
WW-3826
WW-3830
WW-3836
WW-3850
1-1/8 (28.6)
1-5/8 (41.3)
1-3/4 (44.5)
2-1/2 (63.5)
3-3/4 (95.3)
3/8" - 16 2-1/4 (57.2)
2-3/4 (69.9)
3 (76.2)
3-3/4 (95.3)
5 (127.0)
3/8 (9.5)
7/8 (22.2)
1-1/8 (28.6)
1-7/8 (47.6)
3-1/8 (79.4)
WW-1226
WW-1236
WW-1242
WW-1254
WW-1270
1-1/4 (31.8)
2-1/4 (57.2)
2-3/4 (69.9)
3 (76.2)
3-1/2 (88.9)
1/2" - 13 2-3/4 (69.9)
3-3/4 (95.3)
4-1/4 (108.0)
5-1/2 (139.7)
7 (177.8)
1/8 (3.2)
1 (25.4)
1-1/2 (38.1)
2-3/4 (69.9)
4-1/4 (108.0)
WW-5834
WW-5842
WW-5850
WW-5860
WW-5870
WW-5884
1-3/4 (44.5)
2-1/2 (63.5)
3-1/4 (82.6)
4-1/4 (107.9)
3-1/2 (88.9)
3-1/2 (88.9)
5/8" - 11 3-1/2 (88.9)
4-1/4 (108.0)
5 (127.0)
6 (152.4)
7 (177.8)
8-1/2 (215.9)
1/8 (3.2)
7/8 (22.2)
1-5/8 (41.3)
2-5/8 (66.7)
3-5/8 (92.1)
5-1/8 (130.2)
WW-3442
WW-3446
WW-3454
WW-3470
WW-3484
WW-34100
2-3/8 (60.3)
2-7/8 (73.0)
3-5/8 (92.1)
3-1/2 (88.9)
3-1/2 (88.9)
1-3/4 (44.5)
3/4" - 10 4-1/4 (108.0)
4-3/4 (120.7)
5-1/2 (139.7)
7 (177.8)
8-1/2 (215.9)
10 (254.0)
1/4 (1.6)
3/4 (19.1)
1-1/2 (38.1)
3 (76.2)
4-1/2 (114.3)
6 (152.4)
WW-10060
WW-10090
2-1/2 (63.5)
2-1/2 (63.5)
1" - 8 6 (152.4)
9 (228.6)
1/2 (12.7)
3-1/2 (88.9)
* For continuous extreme low temperature applications, use stainless steel.

SELECTION CHART

Trubolt Type 316 Stainless Steel
Contains more nickel and chromium than Type 304, and 2% - 3% molybdenum, which gives it better corrosion resistance. It is especially more effective in chloride environments that tend to cause pitting.
PART NUMBER THREAD LENGTH In. (mm) ANCHOR DIA. In. (mm) & DRILL BIT DIA. In. (mm) OVERALL LENGTH In. (mm) MAX. THICKNESS OF MATERIALS TO BE FASTENED In. (mm)
SWW-1422,
SWW-1432
1-1/4 (31.8)
2-1/4 (57.2)
1/4" - 20 2-1/4 (57.2)
3-1/4 (82.6)
7/8 (22.2)
1-1/8 (28.6)
SWW-3822
SWW-3826
SWW-3830
SWW-3836
SWW-3850
1-1/8 (28.6)
1-5/8 (41.3)
1-3/4 (44.5)
2-1/2 (63.5)
3-3/4 (95.3)
3/8" - 16 2-1/4 (57.2)
2-3/4 (69.9)
3 (76.2)
3-3/4 (95.5)
5 (127.0)
3/8 (9.5)
7/8 (22.2)
1-1/8 (28.6)
1-7/8 (47.6)
3-1/8 (79.4)
SWW-1226
SWW-1236
SWW-1242
SWW-1254
1-1/4 (31.8)
2-1/4 (57.2)
2-3/4 (69.9)
3 (76.2)
1/2" - 13 2-3/4 (69.9)
3-3/4 (95.3)
4-1/4 (108.0)
5-1/2 (139.7)
1/8 (3.2)
1 (25.4)
1-1/2 (38.1)
2-3/4 (69.9)
SWW-5842
SWW-5850
SWW-5870
2-1/2 (63.5)
3-1/4 (82.6)
3-1/2 (88.9)
5/8" - 11 4-1/4 (108.0)
5 (127.0)
7 (177.8)
7/8 (22.2)
1-5/8 (41.3)
3-5/8 (92.1)
SWW-3446
SWW-3454
2-1/4 (57.2)
3 (76.2)
3/4" - 10 4-3/4 (120.7)
5-1/2 (139.7)
3/4 (19.1)
1-1/2 (38.1)


Red Head Products Quote Form


Name: Email: Phone:

Enter Product # or Type:   Quantity:

Description:(size,material,finish,head style,etc.)